waterproof material2018-07-31T01:48:48+00:00

Description:

Sunrise Spunbond polyester reinforced with fiber glass is chosen for superior strength, stiffness, purity and uniformity. Available in a variety of weights, meeting a wide range of technical requirements to satisfy the diverse needs.

services-tabs-139154408

Application:

Used as a carrier for bituminous membranes. The width is 1020mm.

Available type:

160g/㎡,180g/㎡,200g/㎡,250g/㎡

services-tabs-139154408

Description:

Self-adhering bitumen waterproof membrane are produced with SBS blastomeric bitumen as raw
Materials, using polyethylene film, aluminum foil coated on the upward or no film (both side self-adhesive) while self-adhesive protection layer on the downward surface. It has a widely prospect new construction waterproof materials. Good self-adhesion, no leaking, cold flexibility, especially in self-adhesion in self-adhesion that is unique product in waterproof and application.

services-tabs-139154408

services-tabs-139154408

services-tabs-139154408

Description:

The flashing tape is composed of surface films with different colors such as lead-look finish(PET film, aluminum foil or PE film),adhesive rubber/bitumen or pressure sensitive compound and release paper.

services-tabs-139154408

Features:

– SBS membrane flexible at low temperatures
– Fully adhered system prevents lateral water movement
– No flame required
– Factory controlled thickness
– Negligible odour during application

services-tabs-139154408

services-tabs-139154408

services-tabs-139154408

services-tabs-139154408

Description:

Stitch bonded polyester Fabric roll, made specifically to provide support and strength to elastomeric waterproof coating applications,which can add reinforcement to seams, splits, joints, cracks, protrusions and flashings.

Advantages:

» Superior elongation
» Quick wet-out and saturation
» Outstanding physical strength
» Easily conforms to irregular shapes
» Used to increase tensile and add strength to moving joints and flashings

services-tabs-139154408

Special Note:

» All surfaces must be clean, dry.
» It is extremely important to fully saturate the fabric from edge to edge and extending the coating past the edge of the fabric to ensure a watertight condition.
» If wrinkles and fish-mouths are present after material is fully cured out, cut out wrinkle or fish-mouth and re-apply the coating.

services-tabs-139154408

services-tabs-139154408

services-tabs-139154408

Description:

This product is made by Vacuum Metallized Polyethylene Terephthalate laminating with Polyethylene film, offering you the excellent moisture barrier, good low temperature resistance, excellent light barrier and aroma barrier and acceptable elongation.

services-tabs-139154408

Character:

The PET film is very strong, but it is very easy to break, and elongation is very small. PE film is soft and excellent elongation. So we laminated them together, and provide this strong, tough, light barrier film.

services-tabs-139154408

services-tabs-139154408